Air Conditioner


How To Save On Home Heating Bills

As the cold season approaches, we prepare ourselves for the massive heating bills. You can reduce the bills if you take a closer look at your house to spot any problem areas. By fixing the problem areas, you can save lots of money.

Replace Worn Weather-stripping

Usually, cold air gets in the house through torn or broken weather stripping around your room doors and windows. As a result, you have to turn up your furnace or heater to keep the temperature in the room high enough.

Even if you don’t turn up the heater, you lose warm air making your heater work harder. So, make sure you replace or repair your worn weather stripping as soon as possible. Ideally, you may want to do it before the winter season approaches.

Adjust The Door Thresholds

If you can see the daylight underneath the door of your room, you are losing a lot of warm air. The door should be inhdbhbrh touch with that threshold, or the air will keep going out through space.

In some thresholds, 4-5 screws allow you to make adjustments to the height so that you can get rid of the gap. What you need to do is turn the screws until you see almost no daylight. While a little bit of light won’t cause any problem, if the threshold is too high, it may make it harder to open or close the door. Moreover, make sure the door doesn’t drag, or it may wear out your expensive weather stripping.

Use Plastic Film To Cover Windows And Patio Doors

In most homes, warm air leaks through patio doors and windows. So, what you need to do is cover the patio doors and windows with transparent plastic film. By covering the doors and windows with plastic, you can cut down on your heating bills.

Buy A Portable Heater

fjnjfnfIf you use a furnace for heating up your rooms, you may want to buy a portable heater instead. The heater will be an ideal choice for a place where all of your family members get together, such as the living room. Again, this will save you plenty of money.

Eliminate Drafts Around Electrical Boxes

Heat may exit through the drafts around the power boxes in the walls since insulation isn’t placed around it properly. For stopping the heat leakage, you should fill the gaps around each box using latex caulk. If you see some bigger gaps, you may go for foam sealant. You can then put a good quality foam gasket on each switch or outlet and cover them with the plates once again.

So, these are a few simple tips you can use to bring your heating bills down and save a good deal of money with ease.